2013 prius c maintenance reset. How to reset Prius C maintenance required light • @djchuang 2019-02-08

2013 prius c maintenance reset

How to Reset the Maintenance Required Light on a 2013 Toyota Prius C (without Smart Key) — How to Automotive

2013 prius c maintenance reset

Summary: Tt: iphone text messages do not appear on multimedia display. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. After performing an oil change the maintenance data will need to be reset. Summary: Tt: iphone text messages do not appear on multimedia display. If the same thing happens, your car may need to be towed and have the battery replaced. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars.

Next

How to reset the Oil Maintenance Light on a 2012 Prius C

2013 prius c maintenance reset

Press the Start button again and wait for the car to start. Ensure Trip Metre A reading is shown. A technician will need to reset this fault code before the Prius will be able to be started again, even if you add gas to the gas tank. Leave the negative black cable clamped on a piece of metal or on the ground. The multi-information display's initial screen will be displayed for a few seconds. Hold down knob for at least 5 seconds.

Next

How To Reset Toyota Prius MAINT REQD Light

2013 prius c maintenance reset

Send us a comment if our procedures are correctly. I knew I read it somewhere. Summary: Tsb: revision notice: introduction has been updated. If this is the case, the battery may need to be replaced or jump started see Method 2. Instructions on How To Reset a Toyota Prius Maintenance Light 1.

Next

how to reset maintenance light

2013 prius c maintenance reset

It will try three times to engage the gas engine and then it will die immediately, which triggers a fault code. Ensure Trip Metre A reading is shown. Step 2: Connect the positive jumper cable to your battery. Disclaimer: The light is reminding you to change your oil. Ensure Trip Metre A reading is shown.

Next

How to Reset the Maintenance Required Light on a 2013 Toyota Prius C (without Smart Key) — How to Automotive

2013 prius c maintenance reset

Wife's 2016 was due for its 5000 service and we skipped it because they were just going to rotate tires and closest dealer is 45 minutes away. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. If the system fails to reset, the light will continue flashing. Not every single Prius will stall, but if you have a 2004 model, it may be a common occurrence. Ensure Trip Meter A reading is shown.

Next

How to reset the Oil Maintenance Light on a 2012 Prius C

2013 prius c maintenance reset

Start up your Toyota Prius by way of your push button ignition system 2. Wait at least 10 seconds with the brake pedal still engaged. This one is a bit more complicated, so feel free to ask for help or more specific instructions. Start the engine and verify the indicator has been reset. After performing an oil change the maintenance data will need to be reset.

Next

How to Turn Off the Maintenance Required Light on Prius

2013 prius c maintenance reset

Try to start the car normally by using the brake and Start button. If you like to reset any maintenance oil light after an oil change. Method 1 of 4: Restarting your Prius Occasionally, a Prius will just refuse to start normally. Or any warning light for service reminder which appears on the display. If you like to reset any maintenance oil light after an oil change.

Next

How to reset Prius C maintenance required light • @djchuang

2013 prius c maintenance reset

You've successfully reset the maintenance reminder light on your Toyota Prius. Reset the maintenance data U. It's used to modify when to remind one about services. While holding down the trip meter reset knob turn the ignition to run one position before starting engine. Turn the ignition to run one position before starting engine.

Next