So that's why you put this down in there, lock this in. We hope this video helps you out. When putting the bulb back in you want to look right here you can see there is kind of a slot right on top of the housing. Counter clockwise light goes down, clockwise light comes up. Pull up on that side, put my awl down in there, get your fingernail down in there.
In this video we are going to show you how to replace the headlight on this Ford F-250. Okay the next part of this is a bit difficult to film, but right down in here is the headlight. Okay so I reach down in. With the one exception being, you can see that the design of this mount is a little different than the original. Push back on the light some.
Lights from 1A Auto, they are just like the original. So you can see that they hold on a couple different ways. Pre-assembled for essential plug and play easy installation. I want to help you save time and money repairing and maintaining your vehicle. Then it releases and then you can pull the headlight out. We're the company that is here for you on the internet and in person. So that adjuster, I am going to actually measure the distance between the light and the adjuster and make them the same.
Just use my Phillips screwdriver here to try to push these clips all the way down on. Okay here you can see close-up better angle, this is what you are reaching for. The first couple minutes we'll just deal with if you're just replacing the bulb. Take my bent tipped awl and put it in, pull out, and up. Push out and pull up, and there is my other clip out.
Hi, I am Mike Green. So that when I pull it out it stays on my awl. Push the bottom in to lock it and the tops are in. Reach in, turn that ring counterclockwise. Brought to you by www. . Right up here pull the collar back.
Take that off then pull the bulb right out. To remove all these headlights you're first going to have to pull two tabs up. So this one I am going to use my bent tipped awl just so I don't drop it. So I am just going to make the adjusters the new light match the old light. I am going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1A Auto.
Then you kind of have to use it to kind of shake your headlight up and down and then bring it out. They are going to shine. Then the lights all set. These squeeze actually pretty easy. Okay to adjust your headlight, this screw here adjusts your light left to right.
Put it down in, get it started, push the light in. I am also going to do the same thing at the top here and with this one here. Then the other screw is way down in here, right in here. That lines up with the slot on the bulb and push together and lock your ring on. Here's the light that was in the truck, new light from 1A Auto. Then after that we go into how to change the whole headlight assembly. Reconnect, just put the bulb in, push the harness together, Then pull that back to just make sure that is connected correctly.
So the clips go right down on here. There is your bulb disconnected. Projector headlights are also known to provide better night time visibility for increase safety during night time driving. Squeeze the top or the bottom with your fingernail or take a small screwdriver with you. So they're a pretty popular reinstallation item.
You'll probably squeeze them one at a time. One thing you want to do before you go to put them in, is you see here, this is an adjuster and you can see the length between there and there. Then go down to the other side pull out, then twist out, and up. The right parts installed correctly, that is going to save you time and money. Upgrade to our Euro style projector headlights to transform your Ford F250 F350 into Euro style front end. So I am going to adjust this to match that.